TQ wire rope lever tractor

Product Informations

ITA wire rope lever tractor, also known as the ITA wire rope traction machine, is made of aluminum alloy material. ITA wire rope lever tractor is a new, efficient, safe and durable hoisting machinery product. It has the three functions of lifting, traction and tension. The structure of the whole machine is reasonable. High safety factor, long service life, main rated lifting weight is 800 kg, 1600 kg, 3200 kg.In particular, the traction at any angle and the narrow site, open-air operation and no power supply, show its superiority.

The ITA wire rope lever tractor is suitable for operation in narrow areas where local space is restricted. For field operations, high-altitude operations, tunnels, deep well operations, and lifting operations in places with non-electric functions will show special importance.

working principle:
The ITA wire rope lever tractor obtains a linear traction that matches the load by pulling the handle by leveraging the principle of leverage, and alternately acts on a pliers body of the load in the movement to drive the load to run.

Precautions

1. Before using the lever tractor, check whether the handle movement is flexible and whether there is lubricating oil in each friction part. If the handle movement is found to be abnormal, it should be repaired.
2. It is strictly forbidden to pull the forward handle and reverse handle at the same time during work.
3. Be careful not to pull the loose handle during work.
4. To withdraw the wire rope, the load must be removed before the release handle can be pulled.
5. Do not overload it.
6. When working at heights, safety devices must be attached, otherwise they must not be used.
7. When lifting the gondola for high-rise building construction, the working load is 1/3 of the original load and the safety device produced by our factory is added.
8. Check the condition of the steel wire rope frequently. If there is crushed wire or broken wire, it cannot be used because of looseness.

 Product Parameters